Home » Material » How to choose tungsten carbide strips and its grade

How to choose tungsten carbide strips and its grade

Posted by: William 2021-10-07 Comments Off on How to choose tungsten carbide strips and its grade

tungsten carbide strip is also known as cemented carbide bar.Tungsten carbide strip is mainly made of WC tungsten carbide and Co cobalt powder mixed by metallurgical method through powder making, ball grinding, pressing and sintering. The main composition is WC and Co. The composition content of WC and Co in cemented carbide strip of different uses is not consistent, and the application range is extremely wide.
YT5 has the best strength, impact resistance and shock resistance in tungsten cobalt titanium alloy, but poor wear resistance.Suitable for roughing and semi-finishing planing of carbon steel and alloy steel (including forgings, stamping parts, cast iron skin) during intermittent cutting.yt14 high strength, impact resistance and shock resistance, next to YT5 alloy, but better wear resistance than YT5, suitable for carbon steel and alloy steel continuous cutting rough milling car, interrupted cutting semi-finishing car and finishing car.
yg3x has the best wear resistance in tungsten-cobalt titanium alloy, but has poor impact toughness. It is suitable for high speed finishing of cast non-ferrous metals and their alloys, broken fire steel and alloy steel small sections.
YG6 has higher wear resistance but lower than YG3, and better impact and vibration resistance than YG3X.Suitable for semi-finishing and finishing of cast iron, non-ferrous metals and alloys, non-metallic materials with medium cutting speed.
YG8 has high strength, impact resistance and better shock resistance than YG6, but low wear resistance and allowable cutting speed.Suitable for low speed rough machining of cast iron, non-ferrous metal and alloy.
YD201 is suitable for semi-finishing and rough machining of cast iron and light alloy, and can also be used for milling of cast iron and low alloy steel.
YW1 red hardness is good, can withstand a certain impact load, is a good general alloy suitable for heat resistant steel, high manganese steel stainless steel and other refractory steel processing, also suitable for ordinary steel and cast iron processing.
Now do you learn something from above information about tungsten carbide strips and its grade?
Welcome to contact us if you want to know more.

Link to this article:How to choose tungsten carbide strips and its grade

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Tungusten,Thanks!^^