Home » Sponsored Content » What is Inconel 690

What is Inconel 690

Posted by: Yoyokuo 2021-10-22 Comments Off on What is Inconel 690

What Is Inconel 690


Inconel 690 (UNS N06690) nickel-based alloy has a chromium content of 27.0-31.0% and a nickel-based alloy with a nickel content of approximately 59%. Inconel 690 (UNS N06690) nickel-based alloy has excellent resistance to intergranular corrosion and intergranular stress The ability of corrosion cracking is mainly used for heat transfer tubes of steam generators in PWR nuclear power plants.

What is Inconel 690

what is inconel 690 . -PTJ CNC MACHINING Shop

Due to its high corrosion resistance to oxidizing acidic media, it can also be used to process nitric acid, nitric acid + hydrofluoric acid and other chemical equipment and components.

The materials for the heat transfer tubes of steam generators in PWR nuclear power plants have gone through a development process, including 304 austenitic stainless steel, 600 alloy, 800 alloy and 690 alloy. Research on corrosion failure of 600 alloy in service shows that intergranular corrosion and intergranular stress corrosion cracking are the main problems. Alloy 690 is used as a heat transfer tube material for steam generators in PWR nuclear power plants. Since it was put into use in the 1990s, no damage has been reported, and the effect is very good.

Product form: bar, pipe, plate, ring, forging

N06690 chemical composition:

  • Ni: margin
  • Cr: 30.39
  • Fe: 8.8
  • C: 0.023
  • Al: 0.22
  • Ti: 0.26
  • Mn: 0.23
  • Si: 0.07
  • Cu: 0.02
  • P: 0.006
  • S: 0.002

The physical properties of N06690 in the annealed state:

  • Density: 8.19g / cm
  • Melting point: 1343-1377 ℃
  • Young’s modulus: 211GPa
  • Poisson’s ratio: 0.289
  • Yield strength: 350MPa
  • Tensile strength: 700MPa
  • Elongation: 45%

Link to this article: What Is Inconel 690

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:https://www.cncmachiningptj.com/,thanks!


What is Inconel 690PTJ CNC shop produces parts with excellent mechanical properties, accuracy and repeatability from metal and plastic. 5 axis CNC milling available.Machining high-temperature alloy range inclouding inconel machining,monel machining,Geek Ascology machining,Carp 49 machining,Hastelloy machining,Nitronic-60 machining,Hymu 80 machining,Tool Steel machining,etc.,. Ideal for aerospace applications.CNC machining produces parts with excellent mechanical properties, accuracy and repeatability from metal and plastic. 3-axis & 5-axis CNC milling available.We will strategize with you to provide the most cost-effective services to help you reach your target,Welcome to Contact us ( [email protected] ) directly for your new project.

Link to this article:What is Inconel 690

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Tungusten,Thanks!^^