Tungsten steel processing precision non-magnetic tungsten steel feeding guide block

tungsten steel processing precision non-magnetic tungsten steel feeding guide block, PTJ tungsten steel production provides precision non-magnetic tungsten steel alloy parts customization.

As a superhard metal material, tungsten steel is usually weakly magnetic, and special requirements are to use non-magnetic cemented carbide to process non-magnetic tungsten steel parts. Mechanical equipment for the production and processing of magnetic, magnet, and magnetic component materials requires non-magnetic tungsten steel Mold parts.
Non-magnetic tungsten steel refers to tungsten steel alloy material without magnetism. Non-magnetic materials are required for forming molds for special production of magnetic materials. In the past, non-magnetic steel has been used. The mold performance is poor, the hardness is low, and the service life is short. After a period of use, the inner wall of the mold is severely roughened and deformed, which affects the magnetism. The dimensional accuracy and surface quality of the material. Using non-magnetic tungsten steel to replace non-magnetic steel with its good performance can effectively improve production efficiency. PTJ tungsten steel processing non-magnetic tungsten steel feeding guide block is precisely customized and produced according to the size requirements of the customer’s drawings. The size specifications are:
1. On the non-magnetic tungsten steel feeding guide block: 284*48.8-10-16°*6*0.9-1.5*Φ4.4-3;
2. Under the non-magnetic tungsten steel feeding guide block: 284*48.8-10-10°*6*0.9-1.5*Φ4.4-5.
This cemented carbide machining non-magnetic tungsten steel guide block belongs to the LS-HCT03R DCR test fixture, in which the 0.9mm width square straight groove tolerance is -0.03, the depth is 1mm, and the straight groove runs through the entire 284mm total length. The straight groove needs to be customized Professional grinding wheels can meet the precise processing of grinders. The 10mm length before the width of 48.8 to 42.8 is machined with an 8° chute, and the entire tail groove is 16°.

Tungsten steel processing precision non-magnetic tungsten steel feeding guide block, PTJ non-magnetic hard alloy parts precision production customization. Non-magnetic cemented carbide production precision cemented carbide parts processing, cemented carbide parts production, tungsten steel mold parts processing, PTJ Cemented Carbide Production Co., Ltd. provides non-magnetic cemented carbide parts, non-magnetic tungsten steel parts precision customization, precision dimensions Tolerance meets ±0.002, customized production and processing of non-magnetic cemented carbide pin guide seat, non-magnetic cemented carbide injection hole seat, non-magnetic cemented carbide fixed die core core, non-magnetic cemented carbide bevel plastic Type seat, non-magnetic hard alloy outer core ring, non-magnetic hard alloy guide block, non-magnetic hard alloy stirring pin, non-magnetic tungsten steel feed guide block, etc.
PTJ non-magnetic hard alloy produces precision non-magnetic tungsten steel parts processing, the corresponding non-magnetic hard alloy material parameters are as follows:
1. Grain size um: 1.2
2. Ni content%: 9-15
3. Density g/cm3: 13.96
4. Hardness HRA: 86.9
5. Bending strength N/mm2: 2900
6. Porosity: A02B00